HOWO 6x4 Concrete Mixer Truck (8–10 m³)
8 or 10 m³ drum · 6x4 · ready-mix delivery
Updated

Archive vehicle photograph. Ask for current photos of the exact unit in your quote.
The HOWO 6x4 concrete mixer truck, also called a cement mixer or transit mixer, delivers ready-mix concrete from the batching plant to site while the drum keeps turning. Common sizes are 8 m³ and 10 m³.
Typical export builds use a SINOTRUK WD615 or Weichai WP10 engine at 336–380 hp, the HW19710 gearbox, a hydraulic pump, motor and reducer to drive the drum, and a water tank for washing out. We confirm drum size and components on the quotation.
At a glance
- Engine
- 336–380 hp (WD615 or Weichai WP10, by build)
- Drive
- 6x4
- Drum
- 8 m³ or 10 m³
- Drum drive
- Hydraulic pump, motor and reducer
- Water tank
- For drum washing
Price on request: this model is quoted by configuration. See HOWO 371 guide prices or used and refurbished HOWO trucks.
Choosing this configuration
Pick the drum size by legal load, not drum volume: concrete weighs about 2.4 t per cubic metre, so a full 10 m³ drum can exceed axle limits in some countries. Tell us your limits and typical pour size.
Shipping to:TanzaniaAll markets
Every truck is prepared and inspected at our factory in Jiaxiang, Shandong.Tour it in 360°Book a video call
Specifications
| Engine | SINOTRUK WD615 or Weichai WP10.380, 336–380 hp |
| Gearbox | SINOTRUK HW19710 manual, 10 forward / 2 reverse |
| Front axle | SINOTRUK VGD95 |
| Rear axles | SINOTRUK HC16 double reduction |
| Tyres | 12.00R20 |
| Drum | 8 m³ or 10 m³ mixing drum |
| Drum drive | Hydraulic pump, motor and reducer |
| Water tank | Fitted for drum washing |
Typical export build, checked against manufacturer and market listings in October 2026. Your quotation confirms the exact specification before you pay.
Options
- Drum size 8 or 10 m³
- Left- or right-hand drive
- Component brands confirmed on quote
What the HOWO 6x4 Concrete Mixer Truck (8–10 m³) is used for
- Ready-mix concrete delivery from batching plants
- Building and road construction sites
- Contractors running their own batching plant
Before ordering, check working load, reach or drum volume, hydraulic demand, stability, chassis reinforcement, route limits, and operator training. We confirm the exact configuration in the written quotation and proforma invoice before you pay a deposit.
Condition and warranty
- Brand new: factory order
On new and refurbished trucks, the engine, gearbox and rear axle carry a 12-month warranty; wear parts are not covered. Your quotation states the condition, the work done and the parts replaced.
Before the balance payment, ask for dated photos and a video call of the actual truck: chassis, cab, engine bay, gearbox, axles, tyres and odometer. Independent inspection by SGS, Bureau Veritas or another inspector is welcome.
Export documents and shipping
We supply the commercial invoice, packing list, bill of lading and Certificate of Origin. Destination inspection and conformity documents depend on your country: check steering side, emission standard, vehicle age limits, duties and registration rules with a licensed clearing agent before ordering.
Delivery to a Chinese port takes 30 to 45 working days after the deposit. Trucks normally ship by RoRo, or by flat-rack where RoRo is not available. Prices are EXW Jining; sea freight is quoted separately when the truck is ready to ship.
What to include in your quote request
- • Destination country and preferred port
- • Quantity and required delivery timing
- • New, remanufactured, or refurbished condition
- • Left-hand drive or right-hand drive
- • Cargo, payload, body, or equipment requirement
- • Route, road surface, gradients, and climate
- • Required emission standard and inspection scheme
- • Preferred engine, gearbox, tyres, and options
Reference model: Sinotruk HOWO 6x4 Concrete Mixer Truck. Final availability and specifications are confirmed in writing for the actual unit or factory order.
Frequently asked questions
8 m³ or 10 m³ mixer: which should I buy?
Concrete weighs about 2.4 t per cubic metre. Choose the 10 m³ drum only if your axle limits allow the full load; otherwise the 8 m³ drum is the legal choice.
How much is a HOWO concrete mixer truck?
Price on request. Send the drum size, quantity, drive side and destination port, and we reply with an EXW Jining quotation.
Can I get the exact truck specification before payment?
Yes. Ask for the chassis model, engine, gearbox, axles, wheelbase, tyres, body or equipment, condition, price, Incoterm, and delivery schedule in the quotation and proforma invoice. Do not rely only on a general catalogue description.
Can an independent company inspect the truck?
Yes. Independent pre-shipment inspection is welcome. The inspection scope should compare the actual truck with the signed specification and record identification plates, condition, operation, dimensions, and visible defects.
Is the displayed specification guaranteed for every unit?
No. It describes common configurations. Stock and factory-order specifications can vary. Only the final written sales documents and inspection record define the truck being supplied.
